top of page

Brelko Conveyor belt scrapers

E205 brelko

APPLICATIONS

  • Universal choice for all normal cleaning applications.

  • Not suitable for mounting directly onto the head pulley.

  • Use in conjunction with torsion arm mountings to accommodate differing belt thicknesses on the same conveyor and excessive belt movement due to pulley eccentricity, thereby ensuring constant pressure with the belt.

  • Selection of correct blade material gives optimum blade life under all operating conditions and conveyed materials.

FEATURES

  • Patented V-base torsion holder makes blade changing simple.

  • Fully sealed construction of torsion holder prevents material build up or ingress into the spring unit.

  • Twin arm design of the torsion holder prevents radial and lateral blade oscillations and only allows longitudinal blade movement thus ensuring uniform and constant blade contact with the belt, irrespective of variations in belt thicknesses and surface conditions.

  • Pre-Tensioned torsion holders reduces the required pressure against the belt resulting in less wear.

  • Light weight polymeric material used for torsion holder ensures ease of handling, corrosion protection and minimum impact on belt surface after deflection.

  • Patented blade torsion holder and blade design incorporating a deflector skirt ensures accurate assembly and a clean running scraper.

  • Brelko self adjusting torsion mountings allow the scraper to maintain a constant pressure on the belt and greatly extends adjustment intervals, also available is the standard adjustable mounting.

  • All metal components can be made from corrosion resistant materials.

  • Robust construction for longer life.

Single row secondary belt scraper
E205
Composite Heavy Duty Single Row Secondary Belt Scraper
E251
251 brelko

APPLICATIONS

  • As a Heavy Duty Secondary Scraper when wet and sticky materials are conveyed.

  • Not suitable for mounting directly onto the head pulley.

  • Use in conjunction with torsion arm mountings to accommodate different belt thicknesses on the same conveyor and excessive belt movement due to pulley eccentricity, thereby ensuring constant pressure with the belt.

  • Selection of correct blade material gives optimum blade life under all operating conditions and conveyed materials.

FEATURES

  • Patented V-base blade mounting makes blade changing quick and simple.

  • Brelko torsion mountings allow the scraper to maintain a constant pressure on the belt and greatly extend adjustment intervals.

  • Also available is the standard adjustable mounting.

  • Specially formulated composite blades give maximum life, and ensure accurate assembly and a clean running scraper.

  • Brelko self adjusting torsion mountings allow the scraper to maintain a constant pressure on the belt and greatly extends adjustment intervals, also available is the standard adjustable mounting.

  • All metal components can be made from corrosion resistant materials.

Heavy Duty Single Row Premium Secondary Belt Scraper
E255

APPLICATIONS

  • Universal choice for heavy duty cleaning applications. Specially suited for wider high speed belts.

  • Not suitable for mounting directly onto the head pulley.

  • Use in conjunction with torsion arm mountings to accommodate different belt thicknesses on the same conveyor and excessive belt movement due to pulley eccentricity, thereby ensuring constant pressure with the belt.

  • Selection of correct blade material gives optimum blade life under all operating conditions and conveyed materials.

FEATURES

  • Patented V-base torsion holder makes blade changing simple.

  • Fully sealed construction of torsion holder prevents material build up or ingress into the spring unit.

  • Twin arm design of the torsion holder prevents radial and lateral blade oscillations and only allows longitudinal blade movement thus ensuring uniform and constant blade contact with the belt, irrespective of variations in belt thicknesses and surface conditions.

  • Pre-tensioned torsion holders reduces required pressure against the belt resulting in less wear.

  • Light weight polymeric material used for torsion holder ensures ease of handling, corrosion protection and minimum impact on belt surface after deflection.

  • Patented blade torsion holder and blade design incorporating a deflector skirt ensures accurate assembly and a clean running scraper.

  • Brelko self adjusting torsion mountings allow the scraper to maintain a constant pressure on the belt and greatly extends adjustment intervals, also available is the standard adjustable mounting.

  • All metal components can be made from corrosion resistant materials.

  • Robust construction for longer life.

255 brelko
Compact Single Row Secondary Belt Scraper
E705
E705

APPLICATIONS

  • Specially designed for easy installation on all belts up to 750mm wide.

  • Can be installed where there is not enough space for other scrapers.

  • Not suitable for mounting directly onto the head pulley.

  • Use in conjunction with torsion arm mountings to accommodate different belt thicknesses on the same conveyor and excessive belt movement due to pulley eccentricity, thereby ensuring constant pressure with the belt.

  • Selection of correct blade material gives optimum blade life under all operating conditions and conveyed materials.

FEATURES

  • Patented V-base torsion holder makes blade changing simple.

  • Fully sealed construction of torsion holder prevents material build up or ingress into the spring unit.

  • Twin arm design of the torsion holder prevents radial and lateral blade oscillations and only allows longitudinal blade movement thus ensuring uniform and constant blade contact with the belt, irrespective of variations in belt thicknesses and surface conditions.

  • Pre-Tensioned torsion holders reduces the required pressure against the belt for less wear.

  • Light weight polymeric material used for torsion holder ensures ease of handling, corrosion protection and minimum impact on belt surface after deflection.

  • Patented blade torsion holder and blade design incorporating a deflector skirt ensures accurate assembly and a clean running scraper.

  • All metal components can be made from corrosion resistant materials.

  • Robust construction for longer life.

Double Row Secondary Belt Scraper
E305
E305 Brelko

APPLICATIONS

  • As a heavy duty Secondary Scraper when wet and sticky materials are conveyed, providing optimum coverage of belt surface and therefore maximum removal of carryback.

  • Not suitable for mounting directly onto the head pulley.

  • Use in conjunction with torsion arm mountings to accommodate different belt thicknesses on the same conveyor and excessive belt movement due to pulley eccentricity, thereby ensuring constant pressure with the belt.

  • Selection of correct blade material gives optimum blade life under all operating conditions and conveyed materials.

FEATURES

  • Positioning of blades in an overlapping configuration ensures that any material passing between the blades of the first row is removed by the second row.

  • Patented V-base torsion holder makes blade changing quick and simple.

  • Fully sealed construction of torsion holder unit prevents material build up or ingress into the spring unit.

  • Twin arm design of the torsion holder prevents radial and lateral blade oscillations and only allows longitudinal blade movement thus ensuring uniform and constant blade contact with the belt, irrespective of variations in belt thicknesses and surface conditions.

  • Pre-tensioned torsion holders reduces required pressure against the belt resulting in less wear.

  • Lightweight polymeric material used for the torsion holder ensures ease of handling, corrosion protection and minimum impact on belt surface after deflection.

  • Patented blade torsion holder and blade design incorporating a deflector skirt ensures accurate assembly and a clean running scraper.

  • Brelko self adjusting torsion mountings allow the scraper to maintain a constant pressure on the belt and greatly extends adjustment intervals, also available is the standard adjustable mounting.

  • All metal components can be made from corrosion resistant materials.

  • Robust construction for longer life.

Composite Heavy Duty Double Row Secondary Belt Scraper
E351
351 Brelko

APPLICATIONS

  • As a heavy duty Secondary Scraper when wet and sticky materials are conveyed, providing optimum coverage of belt surface and therefore maximum removal of carryback.

  • Not suitable for mounting directly onto the head pulley.

  • Use in conjunction with torsion arm mountings to accommodate different belt thicknesses on the same conveyor and excessive belt movement due to pulley eccentricity, thereby ensuring constant pressure with the belt.

  • Selection of correct blade material gives optimum blade life under all operating conditions and conveyed materials.

FEATURES

  • Positioning of blades in an overlapping configuration ensures that any material passing between the blades of the first row is removed by the second row.

  • Patented V-base blade mounting makes blade changing quick and simple.

  • Specially formulated composite blades give maximum life, and ensure accurate assembly and a clean running scraper.

  • Brelko self adjusting torsion mountings allow the scraper to maintain a constant pressure on the belt and greatly extends adjustment intervals, also available is the standard adjustable mounting.

  • All metal components can be made from corrosion resistant materials.

Heavy Duty Double Row Premium Secondary Belt Scraper
355 Brelko
E355

APPLICATIONS

  • As a heavy duty Secondary Scraper when wet and sticky materials are conveyed, providing optimum coverage of belt surface and therefore maximum removal of carryback.

  • Not suitable for mounting directly onto the head pulley.

  • Use in conjunction with torsion arm mountings to accommodate different belt thicknesses on the same conveyor and excessive belt movement due to pulley eccentricity, thereby ensuring constant pressure with the belt.

  • Selection of correct blade material gives optimum blade life under all operating conditions and conveyed materials.

FEATURES

  • Positioning of blades in an overlapping configuration ensures that any material passing between the blades of the first row is removed by the second row.

  • Patented V-base torsion holder makes blade changing quick and simple.

  • Fully sealed construction of torsion holder unit prevents material build up or ingress into the spring unit.

  • Twin arm design of the torsion holder prevents radial and lateral blade oscillations and only allows longitudinal blade movement thus ensuring uniform and constant blade contact with the belt, irrespective of variations in belt thicknesses and surface conditions.

  • Pre-tensioned blades reduces required pressure against the belt resulting in less wear.

  • Lightweight polymeric material used for the torsion holder ensures ease of handling, corrosion protection and minimum impact on belt surface after deflection.

  • Patented blade torsion holder and blade design incorporating a deflector skirt ensures accurate assembly and a clean running scraper.

  • All metal components can be made from corrosion resistant materials.

  • Robust construction for longer life.

Compact Double Row Secondary Belt Scraper
E805
e805 Brelko

APPLICATIONS

  • Specially designed for easy installation on all belts up to 750mm wide.

  • Can be installed where there is not enough space for other scrapers.

  • Not suitable for mounting directly onto the head pulley.

  • Use in conjunction with torsion arm mountings to accommodate different belt thicknesses on the same conveyor and excessive belt movement due to pulley eccentricity, thereby ensuring constant pressure with the belt.

  • Selection of correct blade material gives optimum blade life under all operating conditions and conveyed materials.

FEATURES

  • Positioning of blades in an overlapping configuration ensures that any material passing between the blades of the first row is removed by the second row.

  • Patented V-base torsion holder makes blade changing simple.

  • Fully sealed construction of torsion holder prevents material build up or ingress into the spring unit.

  • Twin arm design of the torsion holder prevents radial and lateral blade oscillations and only allows longitudinal blade movement thus ensuring uniform and constant blade contact with the belt, irrespective of variations in belt thicknesses and surface conditions.

  • Pre-Tensioned torsion holders reduces the required pressure against the belt for less wear.

  • Light weight polymeric material used for torsion holder ensures ease of handling, corrosion protection and minimum impact on belt surface after deflection.

  • Patented blade torsion holder and blade design incorporating a deflector skirt ensures accurate assembly and a clean running scraper.

  • All metal components can be made from corrosion resistant materials.

  • Robust construction for longer life.

bottom of page